Web Configuration Definitions; Status Page Definitions; Table 5: Status Pages Definitions; Figure 9: Web Access Port - Grandstream Networks DP760 User Manual

Web Configuration Definitions

This section describes DP760 options available in its Web UI. As mentioned, you can log in as an
administrator or an end user.

Status: Display the system info, network status, DECT status options.

DECT: Configure DECT general settings, repeater name and RFPI manual configuration.

Network Settings: Configure network basic and advanced settings.

Maintenance: Configure upgrading and provisioning, web/SSH access, date and time, and syslog,
packet capture and factory reset settings.

Status Page Definitions

DECT Status
Repeater Name Displays name of DECT repeater. Default is DP760_[last 6 digit of MAC address].
Shows firmware version of repeater station.
Repeater FW
Version
Repeater DECT RF Indicates region of repeater station. Example: EU, US, Auto...
Region
Repeater Status Describes the repeater status:



Figure 9: Web Access Port

Table 5: Status Pages Definitions

Scanning for available RFPs: DP760 is scanning and searching for
available RFPs (Radio Fixed Part Identity) address.
Repeater is in normal operation: DP760 DECT repeater is correctly
associated to DP750 base station and the link between them is operational.
DP760 User Manual
P a g e | 21