Grandstream Networks DP760 User Manual page 22


Note: The following message "Repeater is operational after auto configuration
procedure first time" appears briefly during DP760/DP750 association.
Global Functions Connect to Base Station:



Network Status
MAC Address Shows Device ID in hexadecimal format. This is needed by network administrators
for troubleshooting. The MAC address will be used for provisioning and can be
found on the label on original box and on the label located on the bottom panel of
the device.
IP Address Mode Indicates used IP address mode: DHCP, Static IP or PPPoE.
IP Address Displays assigned IP address. Example: 192.168.5.110
Subnet Mask Displays assigned subnet mask. Example: 255.255.255.0
Gateway Displays assigned default gateway. Example: 192.168.5.1
PPPoE Link Up Indicates PPPoE connection status.
DNS Server 1 Shows assigned DNS server address 1. Example: 8.8.8.8
DNS Server 2 Shows assigned DNS server address 2. Example: 8.8.4.4
System Info
Product Model Displays product model info. Default is DP760.
Part Number Shows product part number. Example: 9610003814A (last 2 digits show HW
version, in this example 14A for HW version 1.4A).
Repeater is searching for the requested RFP: DP760 DECT repeater is
searching for DP750 base station configured RFPI. (During manual
association)
Auto Lock: Permits the auto connection between DP760 DECT Repeater
and available DP750 Base Station with opened subscription, when the option
"Use Manually Configured RFPI "under Web GUI > DECT > General Settings
is set to "No".
Manually Lock: Force the connection between DP760 DECT Repeater and
the manually configured RFPI of the DP750 Base Station, when the option
"Use Manually Configured RFPI "under Web GUI > DECT > General
Settings > is set to Yes".
Disconnect: Disconnect the DP760 DECT Repeater from the DP750 Base
Station.
DP760 User Manual
P a g e | 22