Grandstream Networks DP760 User Manual page 29

Allow DHCP Option Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it will
override selected time zone. If set to "No", the repeater station will use selected
2 to override time
zone time zone even if provided by DHCP server. Default is Yes.
Syslog
Syslog Server Sets IP address or URL of system log server. The server collects system log
information from the repeater station.
Syslog Level
Selects log level; the level is one of DEBUG, INFO, WARNING, ERROR (default is
NONE). Syslog messages are sent based on the following events:
Syslog uses USER facility. In addition to standard Syslog payload, it contains the
following components: GS_LOG: [device MAC address] [error code] error
message.
Example: May 19 02:40:38 192.168.1.14 GS_LOG:[00:0b:82:00:a1:be][000]
Ethernet link is up
Packet Capture
Status Displays packet capture status. When user starts to capture trace file, it will show
"RUNNING" status, otherwise, it will show "STOPPED".
Factory Reset
Factory Reset Press Reset to restore the factory default settings on the DP760.
Support
Support Online
Documentation Support
Offline
Support
1. product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. inbound and outbound calls (INFO level)
6. registration status change (INFO level)
7. negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
Redirects the users to tools page and DP7xx product pages
available on Grandstream official website.
Allows users to download administration / user guides and drilling
templates.
DP760 User Manual
P a g e | 29