Network Settings; Table 7: Network Settings Pages Definitions - Grandstream Networks DP760 User Manual

Network Settings

Network Settings – Basic Settings
IP Address Mode Selects IP address mode (DHCP, Static IP or PPPoE) for DP760 DECT Repeater.
Preferred DNS Specifies preferred DNS server to use when DHCP, PPPoE or Static mode is set.
Server
DHCP Settings Host name
(Option 12)
Vendor Class
ID (Option 60)
PPPoE Settings Configures PPPoE account ID, password and service name.
Sets IP address, subnet mask, gateway, DNS server 1, and DNS server 2.
Static IP Settings
Network Settings – Advanced Settings
802.1X Mode Enables/Disables 802.1X mode. To enable this mode, you should select EAP-
MD5. Default is Disable.
Configures the identity for 802.1X mode.
802.1X Identity
MD5 Password Determines the MD5 password for 802.1X mode.
802.1X CA Uploads / deletes the 802.1X CA certificates.
Certificate
802.1X Client Uploads / Deletes the 802.1X Client Certificates.
Certificate
Enable LLDP Activates LLDP (Link Layer Discovery Protocol). Default is Yes.
Layer 2 QoS Enable VLAN
Settings
Layer 2 QoS
802.1Q/VLAN
Tag

Table 7: Network Settings Pages Definitions

Specifies the name of the client. The name may or may not be
qualified with the local domain name. This field is optional but
may be required by ISP.
Exchanges vendor class ID by clients and servers to convey
particular configuration or other identification information about
a client.
Default is DP7XX.
Enables / Disables the VLAN mode. Default is Disabled.
Sets layer 2 QoS 802.1Q/VLAN tag. Default is 0.
DP760 User Manual
P a g e | 24