Feed-In Clutch Lubrication - Ricoh FT2260 Service Manual

1 August 1988

14.1.4 Feed-in Clutch Lubrication

Turn off the main switch.
1.
2. Remove the original set sensor assembly. (See the Pick-up Roller
Replacement section.)
Remove the feed-in solenoid lever spring [A].
3.
4. Remove the pick-up roller assembly [B] (2 E-rings, 2 bushings).
5. Disassemble and lubricate the feed clutch [C] (1 E-ring) with Mobil Temp.
78.
NOTE: a) Be careful not to loose the pin [D].
b) When installing the feed clutch, make sure the positioning pin is
correctly inserted in the cut-out of the clutch.
8-36