Ricoh FT2260 Service Manual page 184

1. Turn off the main switch and unplug the copier.
2. Remove the following parts:
a)
b)
c)
d)
e)
3. Remove the exit assembly [A] (2 screws, 2 wire clamps, 1 connector).
4. Remove the exit sensor [B] (1 screw, 2 wire clamps).
NOTE: When removing and reinstalling the exit sensor, take care not to
damage the sensor feeler.
Front cover
Upper rear cover
Lower rear cover
Exit cover
Lower left cover
5-41
(2 screws)
(2 screws)
(4 screws)
(2 screws)
(2 screws),
1 August 1988