Bosch ISC-CDL1-WA15G Reference Manual page 13

Commercial Series TriTech+ Motion Detector with
Anti-mask
Figure 5.3: Left: wall installation; right: corner installation
Install on a bracket
Mounting brackets help align the detector to a vertical angle and to correct imperfections �
(non-perpendicular angles) of installation surfaces. �
Choosing a mounting bracket: �
– � The B335 bracket allows a vertical pivot range of +10º to -20º and a horizontal pivot
range of ±25º.
– � The B328 bracket installs on a single-gang box and allows rotation of the detector. The
bracket allows you to insert the wiring through the black tube section in the center of the
bracket mounting plate and through the back of the detector base.
– � The B338 bracket designed for ceiling mounting allows a vertical pivot range of +7º to
-16º and a horizontal pivot of ±45º. The bracket allows you to insert the wiring through
the ceiling cavity and into the detector base.
When using a mounting bracket, pre-drill or tap out all of the mounting holes shown for that
bracket in the following figure.
B328
Figure 5.4: Installation holes used with optional brackets
Bosch Security Systems, Inc �
=
B338
B335
Reference Guide
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Installation | en 13
2017.09 | 03 | F.01U.309.350