Commercial Series TriTech+ Motion Detector with
Anti-mask
Figure 7.6: Microwave potentiometer adjustment
7.5
Self test
The motion detector performs a routine self test every 7 hours, testing both the PIR and
microwave circuit. If either technology fails the self test, the motion detector indicates a
trouble condition by activating the trouble output and the LED 4 flash pattern.
Notice!
A self test fail condition indicates that the motion detector cannot perform as expected.
Replace the motion detector.
Bosch Security Systems, Inc
Reference Guide
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Configuration and walk test | en
2017.09 | 03 | F.01U.309.350
29