Hplpcfg; Synopsis; Description; Options - HP Integrity rx1620 Deployment Manual

hplpcfg

Synopsis

hplpcfg

Description

The hplpcfg utility enables or disables the EFI or BIOS boot setting on Emulex 2 GB or 4 GB
Fibre Channel Host Bus Adapters (FC HBA).

Options

Table 5-14 hplpcfg Options
Option
/se
filename
/le
filename

Format

The configuration file for the EFI boot setting has the following format.
Format
[HBA0]
WWID=11223344
HostAdapterBiosEnable=1
SelectBootEnable=1
BootDeviceWWID=22334455
BootDeviceLUN[0]=1111
The text file can be edited to insert the WWID of the boot volume and the LUN number that the
HBA will boot from. The utility discovers the WWID of the HBA and writes the information to
the text file. The text file presents the options in human readable format. The utility updates the
hardware with the boot volume WWID and boot LUN read from the text file.

Example

SSTK-v.2.7# ./hplpcfg /se h.ini
SSTK-v.2.7# cat h.ini
[HBA0]
WWID=10000000c94ab9de
HostAdapterBiosEnable=1
SelectBootEnable=1
BootDeviceWWID=50060e801439c901
BootDeviceLUN[0]=1
Description
Saves the HBA configuration to filename.
Loads the HBA configuration from filename
Description
Section for each HBA
Read-only variable
Input or current value when read from HBA
Input or current value when read from HBA
Input or current value when read from HBA
Input (default LUN) or current value when read from
HBA
hplpcfg 89