HP Integrity rx1620 Deployment Manual page 28

sstk.conf
SSTK interface and auxiliary functions:
main_toolkit_launch.sh
raid1-lsi.sh
sstkw_functions
• The utilities directory contains the following files:
CLMChecking
allboards.xml
cfggen
conrep
conrep.xml
cpqacuxe-X.YY-Z_ia64.tar.gz The array configuration utility operates in capture
efibootmgr
efivar
gen-setupldr-options
hpia64info
hwdisc
hpqlarep
28 Creating a server profile
partition, copying the setup loader ( setupldr.efi) application
to the ESP partition, configuring the winnt.sif file, specifying
the Windows Setup boot option, and rebooting the server.
In this file, you can set the SSTK variables used by the scripts, such
as the default action of SSTK, the disk where windows will be
installed, the name of configuration files, and so on.
Sets up the toolkit environment by creating a RAMdisk,
copying scripts and utilities to the RAMdisk, running I/O
hardware inventory, and prompting you to select
deployment task.
Contains the functions for the RAID configuration in LSI
controllers.
Auxiliary functions for the scripts.
A utility that performs memory optimization in
cellular systems.
A PCI device list file is used by the hwquery and ifhw
utilities to convert PCI IDs found in hardware
discovery into device names.
A utility that is the RAID configuration utility for LSI
controllers used in SSTK for applying RAID 1 in LSI
1068 controllers. The utility works in conjunction with
cpqacuxe.
The configuration replication utility that reads EFI
variables from the model server and records them in
the conrep.dat file.
A file that includes a list of EFI variables which
determines what data to retrieve from the server. You
can edit this file to control the data collection.
mode (reads the configuration of a storage array
controller and records it in a configuration file) or in
input mode (writes the configuration to the target
server). This archive is extracted to /sbin/cpqacuxe
and a structure under /opt/compaq/cpqacuxe.
The EFI boot manager utility loads EFI applications
(such as the OS boot loader) and EFI drivers. The EFI
boot manager allows you to control the server's boot
environment using variables stored in NVRAM.
The efivar utility is a generic tool for setting EFI
variables from SSTK LinuxPE.
The gen-setupldr-options utility generates
options for the setup loader, which launches the
Windows installation process.
The hpia64info utility displays information about
Management Processor and system firmware.
The hardware discovery utility creates an
inventory of the server and writes this data to a file.
The hpqlarep utility enables or disables the EFI boot
setting on QLogic 2 GB or 4 GB HBAs.