HP Integrity rx1620 Deployment Manual page 47

Scripting toolkit deployment guide

Hide thumbs Also See for Integrity rx1620:

Table of Contents

— On drives less than 16 GB, the MSR is 32 MB

— On drives greater than or equal to 16 GB, the MSR is 128 MB

The windows-setup.sh script defines the size of the MSDATA partition as the remainder

of free space on the disk after the MSR on disks not greater than 32 GB. You can change the

size of this partition as needed. The script uses the parted utility to create the disk partitions.

NOTE:

The parted utility uses decimal instead of binary units to measure disk size. This

means that the parted command treats 1 KB as 1000 bytes, 1 MB as 1000 KB, and 1 GB as 1000

MB. Other programs calculate this conversion based on multiples of 1024 (2^10). As a result,

when you specify a size as an argument to the parted command, the actual size is slightly less

than you expect.

NOTE:

Due to a known issue in mount-to-mount FAT partitions greater than 32 GB, the parted

utility will create a 32 GB partition on disks with more capacity, and Windows setup will resize

the partition to the rest of the disk.

Edit windows-setup.sh

Table of Contents