HP Integrity rx1620 Deployment Manual page 81

Table 5-8 cpqacuxe Error Codes (continued)
Code Error
2839
Cannot migrate Logical Drive
Raid
2840
Cannot migrate Logical Drive
Stripe Size
2841
Cannot extend Logical Drive
2842
Invalid Raid
2843
Invalid Size
2844
Invalid Stripe Size
2846
Cannot change Logical Drive
Sectors
2845
Invalid Sectors
2848
Cannot change Logical Drive
Array Accelerator Setting
2847
Invalid Array Accelerator
Setting
290
Error communicating with
Controller
278-282,
Controller is locked by
2564
another machine or user
268
Error saving Controller
1065-1066
Too many coinciding
expansion, migration, or
extension operations
1110
Controller does not support
license keys
1093
Controller requires physical
drives to set license keys
1114
Controller requires
non-failed physical drives
to set license keys
1111
Invalid license key
1112
Controller has maximum
number of license keys
1110
License key is not a
controller feature license
key
2850
Controller does not support
Raid Array ID
Reason
The controller does not support migration, or the current
configuration of the controller does not allow migration to occur.
The controller does not support migration, or the current
configuration of the controller does not allow migration to occur.
The controller does not support extension, or the current
configuration of the controller does not allow extension to occur.
For example, there may be no free space on an array, so extension
is not supported for the logical drive.
The specified RAID is invalid or is not possible with the current
configuration.
The specified size is invalid or is not possible with the current
configuration.
The specified stripe size is invalid, is not supported with the
current RAID level, or is not supported with the current
configuration.
You cannot change the max boot on a configured logical drive.
This leads to data loss.
The specified Max Boot setting is invalid, or is not supported
with the current configuration.
The current controller configuration does not support changing
the logical drive Array Accelerator state.
The specified Array Accelerator setting is invalid or is not
supported with the current configuration.
There was a problem communicating with one or more
controllers.
One or more controllers is locked by another machine or user.
There was a problem saving one or more controller
configurations.
This error is the "invalid increase/decrease" in logical drive offset
error. This can happen when too many unsaved expansions,
extensions, or migrations are tried at the same time.
The controller does not support license key entry or deletion.
The controller requires physical drives for license keys.
The controller requires non-failed physical drives for license
keys.
The entered license key is not a valid license key.
The controller already has the maximum number of license keys
installed.
The entered license key is not a controller feature license key.
The controller does not support Raid Array ID.
cpqacuxe 81