Enclosure Installation Reference - Simplex MINIPLEX 4100-9600 Manual

Enclosure Installation Reference

Front view, box outline without door
3 Bay height 56" (1422 mm)
2 Bay height 40" (1016 mm)
Doors can be hinged left or right
24" (610 mm)
NOTE: A system ground must be provided for Earth Detection and transient protection devices. This connection
shall be made to an approved, dedicated Earth connection per NFPA 70, Article 250, and NFPA 780.
Tyco, Simplex, the Simplex logo, MAPNET II, IDNet, TrueAlarm, SmartSync, MINIPLEX, and TrueAlert are trademarks of Tyco International Services AG or its affiliates in the
U.S. and/or other countries. VESDA is a trademark of Vision Products Pty Ltd.
© 2005 Tyco Safety Products Westminster. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.
Optional semi-flush
Tyco Safety Products Westminster • Westminster, MA • 01441-0001 • USA
www.tycosafetyproducts-usa-wm.com
Side view with door attached
Door thickness
1-3/8"(35 mm)
Exposed cabinet for
semi-flush mounting
1-3/8" (35 mm)
minimum
Exposed door and
cabinet for semi-
flush mounting
2-3/4" (70 mm)
minimum
trim kit reference
Knockout screw/nail holes
(for semi-flush mounting)
Wall board reference
for semi-flush
mounting, 6" stud
Stud alignment
markers, each side
6" stud
4" stud
6-29/32"
(175 mm)
8-3/8"
(213 mm)
S4100-0035-6 4/2005