Sewing With Fi Xed Programs - Pfaff 3811-3/55 Instruction Manual

Sewing
10 Sewing with fi xed programs
.02
Fixed programs are set under the program numbers 1 and 2.
The fi xed programs are are used for the quick and easy sewing of seams with different full-
ness. When sewing with fi xed programs, 2 or 3 seam areas are processed one after the oth-
er. The advance seam zone is effected by actuating the knee switch. The fi xed programs
are designed as concentric programs, meaning after the end of the last seam zone, the
fi rst seam area is started again. The value for the multiple width can be set for each seam
zone, the settings for the target stitch position as well as the needle and foot positions apply
across the entire area and can be changed at any time via the corresponding function.
 Switch on the machine and select the program number "1" or "2", see Chapter 9.04 Se-
lecting program number
Explanation of the displays and functions
Program selection
Opens the menu for inputting the program number, see chapter 9.04 Selecting a program
number.
Seam zone
Displays the number of seams of the sewing program.
Input mode
Quit the sewing mode and call up the input mode.
Fullness
Changes the value for the fullness, see Chapter 9.05 Input fullness.
Material type
The functions are used to select the material type, see Chapter 10.01.02 Selecting the
material type.
Needle raised
Positions the needle in the top position.
37