Sewing With The Fixed Programs - Pfaff 1491E1 Instruction Manual

End bartack
- When pressed once the single end-bartack is switched on.
- When pressed again a double end-bartack is switched on.
- Activating a third time switches the end bartack back off again.
Stitch length
This function opens a direct menu for inputting the desired values for the stitch lengths.
10

Sewing with the fixed programs

.02
Fixed programs are stored at program numbers 1 and 2.
The fixed programs are used for the fast and comfortable sewing of seams with varying
stitch lengths and/or levels of fullness.
The programs have 2 or 3 seam sections which you can switch between with the knee
switch. They are designed as rotary programs and are completed by activating the pedal
(see chapter 10.04 Decorative seams).
Turn the machine on.
1 2 3 4 5 6 7
Fig. 10 - 02
Switch on the bartack functions start/end bartack if desired.
Select the function select program.
Input program number 1 or 2.
1
2
or
Confirm the entry with the Enter key.
Enter
1 2 3 4 5 6 7
Fig. 10 - 03
8 9 0
8 9 0
In the text line you will see a stylized seam behind the number of the current
seam section. Up-dating of the text line on a change of section is enabled or
disabled in the input menu under SERVICE / SEWING MOTOR / SEAM WITH
MOTOR RUNNING ( see chapter 11.09 summary of the service functions ).
Esc
Clear
Enter
Esc
Clear
Enter
Sewing
10 - 2