13
Lifting movement of the main feed dog
.06.08
Rule
When the needle bar is at t.d.c., Needle bar (adjustment hole 1) the cutout of the eccen-
trics 3 and 4 must point vertically downwards.
Fig. 13 - 08
Loosen 2 screws 1.
Move the needle bar to t.d.c.
Turn the eccentric 2 according to the instructions and tighten screw 1 when it is
accessible.
Make screws 1 accessible by turning the handwheel and tighten.
3
5
4
1
1
2
Adjustment
75