Keypad - Pfaff 3811-3/55 Instruction Manual

7

Keypad

.07
Keypad 1 is used to quickly operate the machine during sewing. Each key can be assigned
an individual fullness value, see Chapter 9.05 Input fullness. By means of the respective
light-emitting diode of the 20 keys, activated key functions are displayed (function activated
= luminous diode).
Fig. 7 - 07
Numeric keys (0 - 15)
 The pre-assigned fullness value is retrieved by pressing the key.
 The corresponding average value is called by pressing two adjacent numeric keys at the
same time.
Tape brake (option)
 The tape brake is switched on or off by pressing the key.
When the belt brake is engaged, the gathering of the material is enhanced.
Edge trimmer
 The edge trimmer device is switched on or off by pushing the key.
Correction value +/correction value -
1 1
 By pressing the key the value for the multiple width is increased or decreased by 2
steps.
In the basic setting of the keypad, the set range is divided into 15 sub-steps
from "0" to "max." The basic setting is e.g. after a cold start, see Chapter 13.13
Cold start.
Operating Controls
1
19