Adjustment
13
Zero position of the differential feed
.06.05
Set the stitch length to "0".
Fit adjustment gauge 1
Loosen screw 2 until crank 3 is diffi cult to turn on the shaft.
Whilst continuously turning the handwheel rotate crank 3 so that crank 4 does not
Tighten the screw 2.
72
Rule
The differential feed 5 should not move with the stitch length regulation "0" and the ad-
justment gauge 1 attached.
1
4
Fig. 13 - 05
move.
The adjustment gauge1 remains attached for further adjustments.
3
2
5