11
Seam program input via the function "Teach In"
.01.04
This function is used to create the seam program by sewing a sewing pattern. A new crea-
tion is always made, meaning that when selecting an already existing program it is overwrit-
ten.
Switch the machine on.
Call up "Input" mode.
Call up "Teach In" function.
Make basic settings and complete with the "Enter" function, see Chapter 11.01.01 Basic
settings for seam program input
The following displays and functions appear on the display before sewing:
1
Input the fullness setting, see Chapter 9.05 Entering fullness setting
Input the maximum speed for the current seam zone.
Use the pedal to sew the fi rst seam zone.
The number of stitches in the current seam zone is counted and shown in the display.
Input
47