White Balance Setup - Genie CCTV WAHD2B User Manual

AHD Camera User Manual
SELECT: There are four areas.
DISPLAY: Display the HSBLC areas. There are four areas.
BLACK MASK: Mask the highlight area.
LEVEL: You may increase or decrease the level.
MODE: There are two modes: ALL DAY and NIGHT.
DEFAULT: Reset the setup of HSBLC to the default setting.

2.4 White Balance Setup

Select "WHITE BAL" to choose the White Balance modes.
ATW: In this mode, the camera will constantly monitor color temperature
among about 2500~9500K and adjust white balance automatically. This
mode is prior to other modes.
AWC→SET: Select it and click "Iris +" to go to the lock mode of white
balance. Then the camera locks the reference value of red and blue under
the current color temperature and stops monitoring color temperature.
When the environment changes, please click " Iris+" again to unlock.
INDOOR: Select it to go to indoor mode.
OUTDOOR: Select it to go to outdoor mode.
8