Table of Contents
Advertisement
Table_1 – USB Pin Assignments
When Insertion USB device, please check device's direction.
2.2.6 Ethernet Connector(LAN)
EBC-3330 provides two RJ-45 LAN interface connectors which are fully compliant with
IEEE 802.3u 10/100/1000 Mbps CSMA/CD standards. It is equipped with Intel I210
and supports Wake-On-LAN function. The Ethernet port uses a standard RJ-45 jack
connector with LED indicators on the front side to show Active/Link status and Speed
status.
Pin
Signal Name
1
TX+, MDI0+
3
RX+, MDI1+
5
MDI2-
7
MDI3+
Table_2 – LAN Pin Assignments
LAN1 LED State Table
LAN LED Status
Network link is not established or system
power off
10 Mbps (10 Base-T)
100 Mbps (100 Base-TX)
1000 Mbps (1000 Base-T)
LAN2 Intel i210-AT LED State Table
Pin
Signal Name
2
TX-, MDI0-
4
MDI2+
6
RX-, MDI1-
8
MDI3-
10 Full Duplex
Link/Active
100 Full Duplex
Link/Active
1000 Full Duplex
Link/Active
Table_3 – LAN1 LED State
10
Photo_9 – USB Connector
Photo_10 – Ethernet Connector
LED1 (Link)
Amber/ Blinking
Amber
Blinking
Amber
Blinking
Amber
Blinking
LED2 (SPEED)
OFF
OFF
OFF
Green
ON
Orange
ON
Advertisement
Table of Contents
