Efco EBC-3330 User Manual page 65

Serial Port A: Configure Serial Port using option.
Disable = No configuration.
Enable = User configuration.
AUTO = EFI/OS chooses configuration.
Serial Port B: Configure Serial Port using option.
Disable = No configuration.
Enable = User configuration.
AUTO = EFI/OS chooses configuration.
GPO Value set 4 Bits (GP30 – GP33): Setting address.
WDT: Select Enable/Disable.
WDT Mode: Select count mode.
COUNTER: The time-out counter ranges from 30 to 255 seconds.
Smart Fan Control
FANSPEED 60% at T1
FANSPEED 70% at T2
FANSPEED 80% at T3
FANSPEED 90% at T4
Serial Port A
Serial Port B
GPO Value set 4 Bits (GP30 – GP33)
WDT
WDT Mode
COUNTER
will change to 60%/70%/80%/90% of full speed. Range 0 – 127.
Function Item
Table_38 – Advanced_SUPER IO Configuration Setting
Select Item_1
Disable
Enable (Default
25(Default setting)
35(Default setting)
45(Default setting)
55(Default setting)
Disable
Enable
AUTO (Default
Disable
Enable
AUTO (Default
0x0(Default setting)
Disable
Enable (Default
SECOND (Default
MINUTE
30(Default setting)
55
setting)
setting)
setting)
setting)
setting)