Table of Contents
Advertisement
3.7.4.2 ACPI Table/Features Control
Configures ACPI Tables/Features setting. About setting information.
FACP – RTC S4 Wakeup: Value only for ACPI. Enable/Disable for S4 Wakeup from RTC.
APIC – IO APIC Mode: This item is valid only for WIN2K and WINXP. Also, a fresh install
DSDT – ACPI S3: Enable/Disable ACPI S3 state.
DSDT – ACPI S4: Enable/Disable ACPI S4 state.
BGRT – ACPI BGRT: Enable/Disable ACPI BGRT Table.
Photo_61 – Power_ACPI Table/Features Control Setting
of the OS must occur when APIC mode is desired. Test the IO
ACPI by setting item to Enable. The APIC table will then be
pointed to by the RSDT, the local APIC will be initializes, and the
proper enable bits will be set in ICH4M.
61
Advertisement
Table of Contents
