Table of Contents
Advertisement
LFP EDID Support
EFP EDID Support
IGD Configuration
Integrated Graphics Device: Enable = Enable integrated graphics device(IGD) when
Primary Display: Select which of IGD/PCI graphics device should be primary display.
RC6(Render Standby): Check to enable render standby support.
PAVC: Enable/Disable Protected Audio Video Control.
Power Management Lock: Enable/Disable PM lock.
DOP CG: Enable/Disable DOP clock gating.
GTT Size: Select the GTT size.
Aperture Size: Select the aperture size.
IGD – DVMT Pre-Allocated: Select DVMT5.0 Pre-Allocated(Fixed) graphics memory
IGD – DVMT Total Gfx Mem: Select the size of DVMT 5.0 that the internal graphics
IGD Turbo: Enable/Disable IGD Turbo.
IGD Thermal: Enable/Disable IGD Thermal.
Spread Spectrum clock: Enable/Disable Spread Spectrum clock.
1280 * 760
1280 * 800
1280 * 960
1280 * 1024 24bit
1366 * 768
1366 * 768
1440 * 900
1400 * 1050 24bit
1600 * 900
1680 * 1050 24bit
1680 * 1200 24bit
1920 * 1080 24bit
1920 * 1200 24bit
Disabled
Enabled
Disabled
Enabled
Table_33 – Advanced_VBT Hook Configuration Setting
selected as the primary video adaptor. Disable.
Disable = Always disable IGD.
size used by the internal graphics device.
device will use.
46
18bit
18bit
18bit
18bit
24bit
24bit
24bit
(Default
setting)
(Default
setting)
Advertisement
Table of Contents
