Fanvil X5S User Manual page 56

User Agent
Specific Server Type
SIP Version
Anonymous Call Standard
Local Port
Ring Type
Enable user=phone
Use Tel Call
Auto TCP
Transport Protocol
Enable Rport
Enable PRACK
DNS Mode
Enable Long Contact
Enable Strict Proxy
Convert URI
Use Quote in Display Name
Enable GRUU
Sync Clock Time
Caller ID Header
Use 182 Response for Call waiting
Response Single Codec
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: sales@fanvil.com
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-512-21997
Set the user agent, the default is Model with
Software Version.
Set the line to collaborate with specific server
type
Set the SIP version
Set the standard to be used for anonymous
Set the local port
Set the ring tone type for the line
Sets user=phone in SIP messages.
Set use tel call
Using TCP protocol to guarantee usability of
transport for SIP messages above 1500 bytes
Set the line to use TCP or UDP for SIP
transmission
Set the line to add rport in SIP headers
Set the line to support PRACK SIP message
Select DNS mode, A, SRV, NAPTR
Allow more parameters in contact field per RFC
3840
Enables the use of strict routing. When the phone
receives packets from the server，it will use the
source IP address, not the address in via field.
Convert not digit and alphabet characters to
%hh hex code
Whether to add quote in display name, i.e.
"Fanvil" vs Fanvil
Support Globally Routable User-Agent URI
(GRUU)
Time Sycn with server
Set the Caller ID Header
Set the device to use 182 response code at call
waiting response
If setting enabled, the device will use single
codec in response to an incoming call request
support@fanvil.com
<文档标题>
Beijing Tel:+86-10-5753-6809