Hitachi SF-P90XA Operating & Installation Instructions Manual page 29

How to Install the Washing Machine
Connecting
the power
Checking
levelness
Checking after
installation
■
Connect the washing machine correctly to a grounded AC power
supply.
■
The voltage of the power supply must match the voltage rating of the
washing machine.
■
Do not use extension cords or overload the power outlet by using
power strips.
■
Be sure the washing machine does not wobble.
■
Use the spirit level on the washing machine to check for levelness.
Adjust the adjustable foot if the washing machine is not level.
Loosen
Raise
Adjustable foot
Tighten
Lock nut
If any of the following problems or other abnormalities occur, immediately
unplug the power plug and contact your local service center.
■
The washing machine does not operate when the power is turned on.
■
The power cord is damaged.
■
There are abnormal vibrations or sounds during operation.
■
There is a smell of burning.
Rotate the lock nut in the direction
of the arrow to loosen it and
then rotate the adjustable foot to
Lock nut
stabilize the washing machine.
When the adjustment is fi nished,
rotate the lock nut in the direction
of the arrow to tighten it.
29