Customizing Your Faderport; Tune Faders; Tune Fader Sensitivity; Test Modes - PRESONUS FaderPort 16 Owner's Manual

8

Customizing Your FaderPort 16

8.1

Tune Faders

8 Customizing Your FaderPort 16
Select Control SETUP Mode
Studio MCU MCU MCU HUI SETUP EXIT
One (Logic) (Cubase) (Sonar) Restart
FaderPort
8.1 Tune Faders
Tune
Tune Tune Factory
Faders
Faders Touch Default
Sensitivity
8.2

Tune Fader Sensitivity

Tune
Tune Tune Factory Tests
Touch
Faders Touch Default
Sensitivity Sensitivity

Test Modes

8.3
Tests
Tune Tune Factory Tests Display Display
Faders Touch Default Contrast Brightness
Sensitivity
Several useful customization features available for your FaderPort 16.
This allows you adjust fader sensitivity, adjust contrast, and more.
In general, the default settings will work well for more users. If
you would like to adjust these settings, press and hold the first
two Select buttons while powering on your FaderPort 16.
Once your FaderPort 16 powers on, press the Select button beneath the "Setup"
scribble strip.
To adjust your fader speed, press the Select button beneath the Tune Faders screen.
This will open the Tune Faders menu.
Tests
Fader Speed Fader Speed Fader Speed
1 2 3
You can adjust the speed at which your faders will follow automation
moves from 1 to 7, where 1 is the slowest and 7 is the fastest. By
default, this is set to '5. ' Slower speeds will provide smoother fader
movements. Faster speeds will provide snappier fader recall.
When you are done, press the Select button beneath the
Back screen. This will return you to the Setup menu.
Note: Fader Calibration may be necessary before the speed can be adjusted. If this is the
case, you must allow the calibration process finish completely.
To adjust the touch sensitivity of your faders, press the Select button beneath the
Tune Fader Sensitivity screen. This will open the Fader Sensitivity menu.
Display
Contrast
Fader Fader Fader
Sensitivity Sensitivity Sensitivity
1 2 3
You can adjust how sensitive the touch capacitors in your faders will respond. The
sensitivity can be adjusted from 1 to 7, where 1 is the least sensitive and 7 is the most.
By default, this is set to '3. ' If you find that the faders do not immediately react to your
touch, increase the sensitivity. If you find the faders to be too sensitive, lower it.
Please note: in some environments, increasing the sensitive too high may result in false
touches, so it is recommended to make incremental adjustments.
When you are done, press the Select button beneath the
Back screen. This will return you to the Setup menu.
Your FaderPort 16 is equipped with multiple test modes to verify electrical
functionality of all its components. Press the Select button below the Test screen to
Version:
Build Rev:
Build Date:
Build Time:
access these modes.
Mardi Turn LEDs
Gras on
• Mardi Gras. This test mode will cycle through all the LEDs and
Fader movements. Press the last Select button to exit.
Fader Speed Fader Speed Fader Speed
4 5 6
Fader Fader Fader
Sensitivity Sensitivity Sensitivity
4 5 6
Turn LEDs Set LEDs Set LEDs
off red green
FaderPort™ 16
Owner's Manual
Fader Speed
7
Back
Fader
Sensitivity
7
Back
Set LEDs Test Inputs
blue
Back
58