6
Sonar (MCU)
6.1
Getting Started
2. Next, go to the Control Surfaces section and click the
yellow star to Add a New Control Surface.
3. Select Mackie Control as Controller/Surface.
4. Select "MIDIIN1 (PreSonus FP16)" for the Input Port and
"MIDIOUT1 (PreSonus FP16)" for the Output Port.
5. Next, go to the Control Surfaces section and click the
yellow star to Add a New Control Surface.
6. Select Mackie ControlXT as Controller/Surface.
7. Select "MIDIIN2 (PreSonus FP16)" for the Input Port and
"MIDIOUT2 (PreSonus FP16)" for the Output Port.
8. Click "Apply" and then "OK" to close the window.
FaderPort™ 16
Owner's Manual
39