Sends Mode; Pan Mode; Timecode; Session Management - PRESONUS FaderPort 16 Owner's Manual

3 Pro Tools (HUI)
3.7

Session Management

3.6.2

Sends Mode

3.6.3

Pan Mode

3.6.4

Timecode

3.7 Session Management
1
2
3
4
5
Press the Bypass button to bypass the focused plugin.
Press the Macro button to compare plug-in changes.
To toggle between Velocity Sensitive and Fixed modes, press Shift and Master
simultaneously.
• Velocity Sensitive. While in Velocity Sensitive mode, parameter
selection is based on how fast you move the corresponding fader.
•
Fixed. While in Fixed mode you can scroll through
the entire range of a parameter.
Engaging Sends mode will allow Faders and Select buttons control channel sends
within Pro Tools. The scribble strip above each fader will display the send that the
fader and Select button are controlling.
1. Press "Sends" button to enter Sends mode. Sends slots
A - E will be listed in the Scribble strips.
2. Press the Select button below the of the lettered Send slot you want to
adjust and use the faders to adjust the send level of each channel.
Power User Tip: While Sends mode is active, you can use the Pan/Param knob to the
left of the scribble strips to adjust the send for the currently selected channel.
3. Press the Select button again to return to the send slot selection view.
4. Press the Send button below the Exit screen to return to Track mode.
Pressing the Pan button will allow you to adjust pan for every track using the faders.
For stereo channels, the left pan is active by default. To switch to the right pan
control, press Shift.
Press the Shift and Track buttons simultaneously to view the Timecode on the
scribble strips. This follows the Timecode type you have selected from within Pro
Tools. While Timecode is active, the faders continue to control level.
1. Audio / Inputs. Press to view Mixer window.
2. VI / MIDI. Press to view Arranger window.
3. Bus / Outputs. Press to view Transport window.
4. VCA / FX. At the time of publication, this button has no function in Pro Tools.
5. All / User. At the time of publication, this button has no function in Pro Tools.
FaderPort™ 16
Owner's Manual
19