PRESONUS FaderPort 16 Owner's Manual page 36

5 Cubase / Nuendo (MCU)
5.1 Getting Started
7. Select "Mackie Control" from the pull-down menu.
8. Set the MIDI Input and Output for Mackie Control 2 to "PreSonus FP16 Port 1. "
9. Click "Apply. "
Note: The Port order is critical to proper functionality. The first Mackie Control device
must be set to Port 2 and the second Mackie Control device must be set to Port 1.
10. Select MIDI Port Setup and make sure that "In All MIDI" box is
unchecked for both FaderPort 16 and then click "OK".
Both Mackie Control devices will need to be switched to Compatibility mode. To do
this, select both the Mackie Control and the Mackie Control 2 from the Devices menu.
From the pop-up windows, select Compatibility from the menu.
Your FaderPort 16 is now ready to use. Enjoy!
FaderPort™ 16
Owner's Manual
32