Channel Strip - PRESONUS FaderPort 16 Owner's Manual

3 Pro Tools (HUI)
3.2

Channel Strip

Channel Strip
3.2
kick
Pan
3. Set the Receive From and Send To menus to "FaderPort 16 Port 1" and "#Ch's" to 8.
4. Create a second HUI device and set the Receive From and Send
To menus to "FaderPort 16 Port 2" and "#Ch's" to 8.
5. Click "OK. "
Your FaderPort 16 is now ready to use. Enjoy!
1. Channel Name. Displays the Channel name. When the fader is being
1
adjusted, the fader value will also be displayed.
2
2. Metering. Displays the channel metering. This can be turned on or off by
3
pressing SHIFT plus the push button encoder in the Session Navigator.
3. Pan Position. Displays the Channel's current pan position.
4
4. Pan/Param. The push-button encoder controls the pan
of the currently selected channel while in Track mode. For
stereo channels, this will default to the left pan control.
5
Push the encoder to access the right pan control.
5. Select Button. This button selects the corresponding
channel in Pro Tools. While selected, several editing
6
functions are available. See Section 3.2.1.
7
6. Mute. Mutes the corresponding channel's output signal.
7. Solo. Isolates the corresponding channel's output signal in the mix.
8. Touch-Sensitive Fader. This 100 mm motorized fader can be used to
control volume levels, aux send levels, panning, or plug-in parameters,
depending on mode. See Section 3.6 for more information.
9
FaderPort™ 16
Owner's Manual
15