MATTRESS FIRM 500 Owner's Manual page 8

steP 2
Remove the hardware box.
steP 3
Install (4) legs into the base frame. Place (1)
plastic washer over the threaded insert at (1)
corner of the base frame (FIGURE 2). Then,
screw (1) leg into the threaded insert, keeping the
washer in between the insert and leg (FIGURE 3).
Repeat at each corner of the base.
FIGURE 2
FIGURE 3
LEGS –
SCREW INTO
THREADED
INSERT AT
EACH CORNER
8
500 Adjustable Base Owners Manual 99301625-d
installation installation
READ ALL INSTRUCTIONS BEFORE USING
DO NOT ATTEMPT TO SCREW LEGS INTO
ANY OTHER INSERTS. THIS WILL DAMAGE
PLASTIC WASHER
(placed over
threaded insert)
CAUTION CAUTION
PRODUCT.