MATTRESS FIRM 500 Owner's Manual page 16

reMote control PrograMMing (1 or 2 remote controls - 2 bases)
Program One or Two Remotes to Operate Two Bases - perform
the following numbered procedure. NOTe: mAKe SURe BOTH
RemOTeS ARe IN "PReSS & HOLD" mODe AND BOTH BASeS
ARe FLAT BeFORe BeGINNING PROCeDURe. If Cust 1 and
Cust 2 have custom positions saved, revert back to factory
settings before beginning procedure.
steP 1
Plug both adjustable bases into electrical power source.
Operate both remote controls to verify each remote
functions properly with its respective base. NOTe: see
1-to-1 programming procedure if bases do not operate.
Using remote controls, adjust both bases to flat position.
Unplug both bases from electrical power outlet.
steP 2
Choose base 1 remote. Retain base 2 remote control as a
spare or use if 2 remotes are desired to operate both bases.
steP 3
Position both bases on their sides, in close proximity
to each other. CAUTION: AT LeAST TWO PeOPLe
ARe ReCOmmeNDeD FOR HANDLING AND mOVING
ADJUSTABLe BASe.
steP 4
Locate dual sync cable (FIGURE 13).
FIGURE 13
DUAL SYNC
CABLE
FEMALE PLUG
(don't use)
MALE PLUGS
(use)
steP 5
On base 1, plug one of the male sync cable plugs into the
sync port of the toggle switch control box, mounted to the
underside of the base, near the control box (FIGURE 14).
FIGURE 14
16
500 Adjustable Base Owners Manual 99301625-d
FEMALE PLUG
(don't use)
TOGGLE SWITCH
CONTROL BOx
SYNC
PORT
OR
REMOTE 1
steP 6
Repeat Step 5 with base 2, using the remaining male plug
of the dual sync cable. Note: Female plugs of the dual sync
cable are not used.
steP 7
Turn both bases over so they are resting on their legs.
CAUTION: mAKe SURe CABLe IS CLeAR OF BASe AND FRee
OF ANy PINCH POINTS.
steP 8
Plug both bases into electrical power source.
steP 9
Operate both bases with the remote control. NOTe: If bases
do not operate in unison with the remote, verify dual sync
cable connections are fully seated in both reset ports. Unplug
both bases, wait 10 seconds, then plug them back in.
CONTROL
BOx
BASE 1
REMOTE 2
BASE 2