Advertisement
Available languages
Available languages
Quick Links
Syncing Guide
One Remote to One Base
Mattress Firm 300
1
Unplug base, wait 3 minutes, and
then plug back in.
3 minutes
3
Press any button on remote to verify
if base is working correctly.
HEAD
HEAD
MEM
FOOT
FOOT
FLAT
2
On the remote press and hold the HEAD
UP and FLAT buttons until remote
backlight flashes once.
HEAD
FOOT
HEAD
FOOT
MEM
FLAT
HEAD
FOOT
HEAD
FOOT
MEM
FLAT
1
Advertisement
Related Manuals for MATTRESS FIRM 300
Summary of Contents for MATTRESS FIRM 300
- Page 1 Syncing Guide One Remote to One Base Mattress Firm 300 Unplug base, wait 3 minutes, and On the remote press and hold the HEAD then plug back in. UP and FLAT buttons until remote backlight flashes once. HEAD FOOT HEAD...
- Page 2 Syncing Guide Pairing Two Bases Mattress Firm 300 Make sure both remotes are in default Simultaneously press and hold mode. To put base in default mode, FOOT UP and FLAT on both remotes press and hold FLAT and FLASHLIGHT until the backlight flashes once on buttons until backlight flashes.
- Page 3 Syncing Guide Press and Release Mode Mattress Firm 300 Press and hold MEM and FLASHLIGHT buttons on remote until backlight flashes once. HEAD FOOT FOOT HEAD HEAD FOOT HEAD FOOT FLAT FLAT Press and Hold Mode Mattress Firm 300 Press and hold FLAT and FLASHLIGHT buttons on remote until backlight flashes once.
- Page 4 Syncing Guide Separating Two Bases Mattress Firm 300 Press the learn button on the base 1 On remote 1 press and hold the HEAD control box twice in rapid succession. UP and FLAT buttons until remote backlight flashes once. HEAD...
- Page 5 Guía de Sincronización 1 Control Remoto Para Opera Una Base Mattress Firm 300 Desconecte la base por 3 minutos, Simultáneamente presione y sostenga luego conéctela de nuevo. ambos botones PARA SUBIR LA CABEZA (HEAD UP) y POSICIÓN PLANA (FLAT) en el control remoto hasta que la luz de fondo comience a parpadear una vez.
- Page 6 Guía de Sincronización Emparejamiento de dos bases Mattress Firm 300 Asegúrese que los dos controles remotos estén Simultáneamente presione y sostenga en modo predeterminado. Para colocar la base los botones PARA SUBIR EL PIE en modo predeterminado, presione y sostenga (FOOT UP) y POSICIÓN PLANA (FLAT)
- Page 7 Guía de Sincronización Modo de presionar y soltar Mattress Firm 300 Mantenga presionados los botones MEM y LINTERNA (FLASHLIGHT) en el control remoto hasta que la luz de fondo parpadee una vez. HEAD FOOT HEAD FOOT HEAD FOOT HEAD FOOT...
- Page 8 Guía de Sincronización Separando dos bases Mattress Firm 300 Oprima el botón de aprendizaje en la En el control remoto 1, mantenga caja de control de la base 1 dos veces presionados los botones PARA SUBIR LA en rápida sucesión.
Need help?
Do you have a question about the 300 and is the answer not in the manual?
Questions and answers
how do i turn off the under bed light
To turn off the under bed light on a MATTRESS FIRM 300 adjustable bed, use the remote control. If the light stays on even after attempting to turn it off and unplugging the bed for a few hours, and if desyncing the remote does not help, the issue may be with the control box or internal wiring. In that case, further troubleshooting or replacing the control unit may be needed.
This answer is automatically generated
My mother has this base and it is only 1 1/2 years old and the base just stopped working. I have tried everything, new batteries in the remote, checked the cords they all seem to be plugged in and nothing. I have unplugged for 3 minutes to reset and nothing????
The issue with a MATTRESS FIRM 300 base that has stopped working after 1.5 years could be due to a remote control failure. The base uses a specific remote that operates on a particular radio frequency and software version. If the remote stops working or is lost, it cannot be replaced with a similar-looking remote, as only the original remote is compatible. Since the manufacturer (Enso) is no longer in business, getting an exact replacement remote is not possible, which may prevent the base from functioning.
This answer is automatically generated