Table of Contents
Advertisement
Step 1
Slowly put the connected integration connection cable and multi-function combination cable into
the wall-mounted bracket.
Step 2
Use the screws to fix the junction box on the bracket.
Step 3
Push the pre-hung screw of the speed dome flange along the hanging hook on the bracket till the
screw reaches the bottom of the hanging hook.
Step 4
Rotate the speed dome to make the pre-hung screw stuck tightly with the hanging hook.
Step 5
Screw three M6*14 stainless screws on the bracket into the groove of the speed dome flange,
use inner hex tool to fasten the three pre-hung stainless screws on the speed dome, which is
shown in Figure 2-17.
Figure 2-17
Step 6
Check if the three stainless screws on the quick installation connector are tightened well, make
sure the speed dome is firmly fixed and reliable without being loose, besides, the safety hook is
reliably connected. So far the installation of speed dome is completed, which is shown in Figure
2-18.
12
Advertisement
Table of Contents
