Stopping Dhw Heating - Viessmann VITODENS Series Operating Instructions Manual

DHW heating
Setting the time program for DHW heating
Example:
You want to set the same time program
for every day except Monday:
Select the period
"1234567" and set the time
program.
Then select "1" and set the time pro-
gram for this.
Note
If you want to terminate the setting proc-
ess prematurely, keep pressing
the required display appears.

Stopping DHW heating

You do not want DHW, but do want
central heating.
Press the following keys:
1. for settings; "
2. OK to confirm; "
3. OK to confirm; " " flashes.
4. until "
5. OK to confirm; the rooms and
DHW are heated (winter
mode).
6. for settings; "
7. for " ".
18
until
" flashes.
" flashes.
" flashes.
" flashes.
(cont.)
Deleting a time phase
Set the time for the end point to the same
time that was set for the start point. For
the selected time phase the display
shows "- - : - -".
8. OK to confirm; temperature
flashes.
9. to 10 °C.
10. OK to confirm; the new tempera-
ture is saved.
You want neither DHW nor central
heating.
Press the following keys:
1. for settings; "
2. OK to confirm; "
3. OK to confirm; " " flashes.
4. until " " flashes.
" flashes.
" flashes.