Central heating
Setting the time program for central heating
Example shown:
The start time of time phase 1 for Mon-
day: 06:00 h.
1 06:00
Ô
1
Central heating menu
Time program menu
1
Weekday Monday
Start time
Ô
1
Time phase "1"
06:00 Time
Example:
You want to set the same time program
for every day except Monday:
Stopping the central heating
You do not want to heat any rooms
but you want to heat DHW.
Press the following keys:
1.
for settings; "
2. OK to confirm; "
3. OK to confirm; "
4.
until " " flashes.
14
" flashes.
" flashes.
" flashes.
(cont.)
Select the period
"1234567" and set the time
program.
Then select "1" and set the time pro-
gram for this.
Note
If you want to terminate the setting proc-
ess prematurely, keep pressing
the required display appears.
Deleting a time phase
Set the time for the end point to the same
time that was set for the start point. For
the selected time phase the display
shows "- - : - -".
5. OK to confirm; central heating is dis-
abled and DHW will be heated
(summer mode).
You do not want either central heating
or DHW.
Press the following keys:
1.
for settings; "
2. OK to confirm; "
3. OK to confirm; "
until
" flashes.
" flashes.
" flashes.