Stopping The Dhw Heating - Viessmann VITODENS Operating Instructions Manual

DHW heating
Setting the time program for DHW heating
Note
Activating the DHW circulation pump is
only advisable for those times when
DHW is actually drawn.
Extended menu:
1.
2. "DHW"
3. "DHW circ time prog"
4. "Individual"
5. Select part of the week or a day.
6. Select the time phase !, ?, § or
$.
7. Set the start and end points for the
relevant time phase.
Note
If you want to terminate the setting proc-
ess prematurely, keep pressing
the required display appears.

Stopping the DHW heating

You do not want to have DHW or heat
your rooms.
For the heating circuit displayed in
the header
Standard menu
1. / for the heating program "Standby
mode" (frost protection monitoring).
2. OK as confirmation.
For the other heating circuits
Extended menu
1.
2. Select the heating circuit if necessary
(see page 17).
3. "Heating"
28
(cont.)
Deleting a time phase for DHW circu-
lation pump
Set the time for the end point to the same
time that was set for the start point. The
display shows the selected time phase
"- - : - -".
DHW circulation
0 2 4 6 8 10 12 14 16 18 20 22 24
- -:- - - - -:- -
?
- -:- - - - -:- -
§
Adopt with
until
4. "Heating program"
5. "Standby mode" (frost protection
monitoring).
You do not want DHW, but do want to
heat the rooms.
Extended menu
1.
2. Select the heating circuit if necessary
(see page 17).
3. "Heating"
4. "Heating program"
5. "Heating and DHW"
6. until the menu is displayed.
7. "DHW"
8. "Set DHW temperature"
9. Select 10 °C.
Mo-Fr
HC1
---
u
---
u
OK