Advertisement
Communication method:
Maximum operating range:
For safety:
Transmitter T4PLS-2.4G
Transmitting frequency:
Power requirement:
Current drain:
Transmission antenna:
Receiver R304SB:
Power requirement:
Receiving frequency:
System:
Size:
Weight:
Caution
When using the T4PLS in the T-FHSS (HIGH) and S-FHSS (HIGH) mode, always use it under the
following conditions:
Servos
Receiver's battery :Matched to the ratings of the receiver and connected digital servo (dry cell battery cannot be used).
Transmitter mode :RX MODE (See p.29 for setting method.)
Under other conditions, the set will not operate, or the specified performance will not be displayed even if it operates.
In addition, it may cause servo trouble. Futaba will not be responsible for damage, etc. caused by combination with the
products of other companies.
In addition, the FSU Fail Safe Unit cannot be used because the system is different. Use the fail safe function of the trans-
mitter.
When using analog servos, always switch the T4PLS servo response to the "NORM" mode.
Transmitter mode:"T-FHSS(NORM)", "T-FHSS(NORM)"and FHSS mode (See p.29 for setting method.)
Receiver's battery :Matched to the ratings of the receiver and connected servo (dry cell battery cannot be used).
The set cannot operate in the "HIGH" mode. Operation in this mode will cause trouble with the servo and other equipment.
Digital servos (including BLS Series brushless servos) can also be used in the "NORM" mode.
4PLS-Eng-09-Reference-115-120.indd
115
Reference
Ratings
:Futaba digital servo (including BLS Series brushless servos)
115
2013/04/08
8:36:48
Advertisement
