Advertisement
Throttle Mode "TH MODE"
This menu has the following 4 functions:
- Servo neutral mode, which sets the throttle neutral ratio to 7:3 or 5:5
- Idle up, which raises the idling speed when starting the engine to improve engine start-
ing performance of a gasoline car (boat)
- Neutral brake, which applies the brakes at the neutral position of the throttle trigger
- Throttle off (engine cut), which stops the engine of a boat, etc. by operating the throttle
servo to the low side regardless of the position of the throttle trigger.
Display "TH MODE" screen by the following method:
(HOME screen)
Press
Throttle servo neutral position "SXNT"
-This function allows selection of the forward side and brake (reverse) side operation ra-
tio from 7:3 or 5:5 by changing the neutral position of the throttle servo.
Forward side
Selecting the throttle servo neutral position
1
(Mode selection)
Select the setting item "SXNT" by (JOG) button. Select "F5/
B5" or "F7/B3" by (+) or (-) button.
"F5/B5"
"F7/B3"
2
When ending, return to the MENU screen by moving the cur-
sor to the positions other than SW/DIAL and pressing the
(JOG) button
80
4PLS-Eng-08-2-Function-P65-83.indd
(MENU 1 screen)
Press
Setup items
SXNT
：Throttle servo neutral position
IDLUP ：Idle-Up rate
F5/B5
Brake side
5 : 5
=Forward 50% : Back50%
=Forward 70% : Back30%
Throttle Mode "TH MODE"
80
(MENU 2 screen)
Select
"TH MODE"
NTBRK ：Neutral brake rate
THOFF ：Throttle off (engine cut) position
F7/B3
Forward side
7 : 3
(Throttle system)
(TH MODE screen)
Press
Press
Brake side
Mode selection (SXNT)
F5/B5, F7/B3
Select button
- Select with the (+) or (-) but-
tons.
2013/04/07
12:48:18
Advertisement
