Advertisement
Timer Function "TIMER"
Use the timer by selecting one of the three timers UP TIMER, DOWN TIMER, and
LAP TIMER.
Display " PTIMER " screen by the following method:
(HOME screen)
Up timer function
- This function can be used to count the time between start and stop, etc.
- The timer repeatedly starts and stops each time the switch is pressed and
accumulates the time between each start and stop. When the count reach-
es 99 minutes 99 seconds, the count returns to 00 minutes 00 seconds and
is repeated.
- The passage of time is announced by sounding of a buzzer (beep) each
minute after starting.
- Alarm
- Prealarm :Alarm advance announcement sound. Beeping begins 5 seconds before the alarm.(beeps)
- After starting, the timer continues to count and can be stopped by switch even when
the LCD switches to another screen.
94
4PLS-Eng-08-3-Function-P84-114.indd
(MENU 1 screen)
Press
Press
TIMER Disply
UP TIMER
FUEL DOWN TIMER
UP TIMER function
:Beep sounds at the set time (minute).
Timer Function "TIMER"
94
(MENU 2 screen)
Select
"TIMER"
(TIMER screen)
Press
Press
LAP TIMER
2013/04/08
9:10:24
Advertisement
