Advertisement
Programmable Mix "PROG MIX"
This function allows you to apply mixing between the steering, throttle, channel 3 and
channel 4.
Additional Functions
-When the steering or throttle channel is the master channel (channel that applies mix-
ing), trim data can be added. (Trim mode)
- The mixing mode selection. (Master mixing mode)
Relating function
steering :EPA, STR EXP, D/R, SPEED, 4WS
throttle
:EPA, THR EXP, ATL, ABS, SPEED, BRAKE MIX, NT-BRK, ESC MIX, TH ACCEL
CH3
:EPA,BRAKE MIX,4WS
CH4
:EPA,BRAKE MIX,ESC MIX
Movement of the slave channel side
The movement of the master channel side will be added to the movement of the slave
channel side.
Display "PROG MIX" screen by the following method:
(HOME screen)
Press
Program mixing adjustment
(Preparation)
- When "PROG MIX" is turned ON and OFF by switch, set
the switch by select switch dial function (p.65).
1
(Mixing function ON/OFF)
Select the setting item "MODE" by the (JOG) button up or
down operation. Use the (+) or (-) and set the function to the
"ON" or "OFF" state.
"INH"
: Function OFF
"ON"
: Function ON. When the switch is OFF, "OFF" is displayed.
70
4PLS-Eng-08-2-Function-P65-83.indd
(MENU 1 screen)
(MENU 2 screen)
Press
Setup items
MODE
: Function ON/OFF
LEFT
: Mixing rate (Left side)
RGHT
: Mixing rate (Right side)
MST
: Master channel
Programmable Mix "PROG MIX"
70
(All channels)
(PROG MIX screen)
Select
Press
"PROG MIX "
Press
SLV
: Slave channel
MXMD
: Mix mode
TRIM
: Trim mode
Function SW
PROGMIX
Function ON/OFF (MODE)
INH,ON(OFF)
Select button
- Select with the (+) or (-) but-
tons.
2013/04/07
12:48:12
Advertisement
