INSTALLATION ( For DIN size cutout)
2. Installation of Bracket
2-1. Insert mounting bracket @ into DIN-standard cutout 182 x 53mm in the dash-
board or a console.
2-2. If required, use plastic spacer @ between mounting bracket and dashboard.
(When the part @ set up to the DIN-standard cutout is loose)
2-3. Bend frame straps @ of mounting bracket to the outside until the frame is
3. Fix the metal strap @ to the back of product and insert it into the part @from
the front. Please make sure that it is inserted to the end. (Fig. 4)
4. Screw the metal strap @ to the car body.