Digital Operator Components; Data Display - Saftronics VG520P4 Technical Manual

1.2.2

Digital Operator Components

This section describes the component names and functions of the Digital Operator. The component names and functions
are shown in Figure 1.4 and key functions are described in Table 1.4.
Firmware – S1043
Revision: 2 (9/98)
Figure 1.4 Digital Operator Component Names and Functions
Operation Mode Indicators
DRIVE: Lit when in Operation mode.
FWD: Lit when there is a forward run command input.
REV: Lit when there is a reverse run command input.
SEQ: Lit when the run command from the control circuit terminal is
enabled.
REF: Lit when the frequency reference from control circuit
Terminals 13 and 14 is enabled.

Data Display

Two-line LCD that displays data for monitoring, user constants and set
values with 16 characters per line.
Keys
Execute operations such as setting user constants, monitoring, Jog,
and Auto-Tuning.
7
Chapter 1: Introduction
© Saftronics, Inc.