Confirmations Upon Delivery; Nameplate Information; Never Install An Inverter That Is Damaged Or Missing Components. Doing So Can Result In Injury - Saftronics VG520P4 Technical Manual

2.1

Confirmations Upon Delivery

•

Never install an Inverter that is damaged or missing components. Doing so can result in injury.

Check the following items as soon as the Inverter is delivered.
Item
Has the correct model of Inverter been
delivered?
Is the Inverter damaged in any way?
Are any screws or other components loose?
If you find any irregularities in the above items, contact the agency from which you purchased the Inverter or your Saftronics representative
immediately.
2.1.1

Nameplate Information

§
Example Nameplate
Standard domestic Inverter: 3-phase, 200VAC, 0.4 kW, IEC IP20 and NEMA 1 standards.
Model number
Input specifications
Output specifications
Lot number
Serial number
§
Inverter Model Numbers
No.
2
4
D
E
Firmware – S1043
Revision: 2 (9/98)
Table 2.1 Checks
Check the model number on the nameplate on the side of the Inverter (See Nameplate
Information 2.1.1).
Inspect the entire exterior of the Inverter to see if there are any scratches or other damage
resulting from shipping.
Use a screwdriver or other tools to check for tightness.
MODEL : VG520P4 SPEC: 20P41A
INPUT : AC 3PH
OUTPUT : AC 3PH
LOT NO :
SER NO :
VG5
VG5
UL/C-UL model
Voltage Class
AC input, 3-phase, 200 V
AC input, 3-phase, 400 V
DC input, 3-phase, 200 V
DC input, 3-phase, 400 V
CAUTION
Method
200-230 V 50Hz
200-230 V 60Hz
0-230 V 1.2kVA 3.2 A
MASS : 3.0kg
SAFTRONICS INC
2 0P4
No. Max. Motor Capacity
0P4
0P7 0.75 kW
to
075 75 kW
"P" indicates the decimal point.
10
Chapter 2: Handling Inverters
Inverter specifications
Mass
to
© Saftronics, Inc.