Pg Speed Option Card Terminal Blocks - Saftronics VG520P4 Technical Manual

Chapter 3: Wiring
3.7.2

PG Speed Option Card Terminal Blocks

The terminal specifications for each PG Speed Option Card are given in the following tables:
§
PG-A2 (For V/f with PG Feedback Mode Only)
Terminal
TA1
TA2
§
PG-B2 (For Flux Vector Control Mode Only)
Terminal
TA1
TA2
TA3
§
PG-D2 (For V/f with PG Feedback Mode Only)
Terminal
TA1
TA2
NOTE: 5 VDC and 12 VDC cannot be used at the same time.
Firmware – S1043
Revision: 2 (9/98)
Table 3.10 PG-A2 Terminal Specifications
No. Contents
1
Power Supply for pulse generator
2
3
+12 V/open collector switching
4 terminal
5
Pulse input terminal
6
7
Pulse motor output terminal
8
(E) Shield connection terminal
Table 3.11 PG-B2 Terminal Specifications
No. Contents
1
Power Supply for pulse generator
2
3
A-Phase pulse input terminal
4
5
B-Phase pulse input terminal
6
1
A-Phase monitor output terminal
2
3
B-Phase monitor output terminal
4
(E) Shield connection terminal
Table 3.12 PG-D2 Terminal Specifications
No. Contents
1
2 Power Supply for pulse generator
3
Pulse input + terminal
4
Pulse input − terminal
5
6 Common terminal
Pulse monitor output + terminal
7
Pulse monitor output − terminal
8
(E) Shield connection terminal
44
Specifications
12 VDC(±5%), 200 mA maximum
0 VDC (GND for power supply)
Terminal for switching between 12 V voltage
input and open collector input. For open collector
input, short across 3 and 4
H: +4 to 12 V; L: +1 V maximum. (maximum
response frequency: 30 kHz)
Pulse input common
12 VDC (+10%), 20 mA maximum
Pulse monitor output common

Specifications
12 VDC(±5%), 200 mA maximum
0 VDC (GND for power supply)
H: +8 to 12 V
L: +1 V maximum
(maximum response frequency: 30 kHz)
Pulse input common
H: +8 to 12 V
L: +1 V maximum
(maximum response frequency: 30 kHz)
Pulse input common
Open collector output, 24 VDC, 30 mA maximum
A-Phase monitor output common
Open collector output, 24 VDC, 30 mA maximum
B-Phase monitor output common

Specifications
12 VDC(±5%), 200 mA maximum (see note)
0 VDC (GND for power supply)
5 VDC ((±5%), 200 mA maximum (see note)
Line driver input (RS-422 level input)
Maximum response frequency: 300 kHz
—
Line driver output (RS-422 level output)
—
© Saftronics, Inc.