Button Functions; Audible Signals - AEMC 6417 Quick Start User Manual

Button Functions

Button
•
•
•
MEM
•
▼
•
►
•
•
•
•
HOLD
&
•
AUTO-HOLD

Audible Signals

Four types of audible signals can be generated:
Type
Low-pitched
Permanent
High-pitched
Permanent
When the rotary switch is set to Ω+A or A: Increases the brightness of
the OLED display; makes it easier to read the display in an environment
with strong background illumination. Highlighting activated for 30 seconds.
When the rotary switch is set to SET-UP or MR: Serves as ▲ arrow
when browsing in the menus and values. The brightness of the display
does not change when device is set to SET-UP or MR.
When the rotary switch is set to Ω+A or A: Records the measured
value. All of the data is recorded in the Standard or Advanced mode.
When the rotary switch is set to SET-UP or MR: Serves as ▼ arrow
when browsing in the menus and values.
When the rotary switch is set to Ω+A (Advanced Mode):
Short Press: Switches the display through the following 3 modes:
- Display of the impedance recalculated at the selected frequency.
- Display of the contact voltage (product Z*I).
- Display of R and L.
Long Press: Activates or deactivates the audible alarms.
When the rotary switch is set to SET-UP:
- Validation when browsing in the menus and values.
When the rotary switch is set to MR (Advanced Mode):
- Switches the display through the measurement screens and the
measurement date/time.
When the rotary switch is set to Ω+A:
- Freezes the measurement display for as long as the HOLD button is
pressed. The NOISE, clamp open (
are visible if they were active.
When the rotary switch is set to MR or SET-UP:
- Activates or deactivates the Bluetooth
Auto-Hold Function:
If the AUTO-HOLD mode was activated during instrument SET-UP, open-
ing the clamp places the device in an identical state to the HOLD mode for
as long as the clamp is open. The benefit of this function is that it makes it
easy to freeze the measurement with one hand, when access to the HOLD
button is difficult. If the HOLD button is not pressed during this time, clos-
ing the clamp automatically exits the AUTO-HOLD mode.
Duration
Short Normal use (button pressed).
Over(under)-shoot of a measurement alarm threshold (Ω, A).
Short Abnormal use (for example, memory full).
Overshoot of a safety alarm threshold (V).
Description
), and alarm overshoot ( ) icons
connection.
®
Description