Button Functions - AEMC 6417 User Manual

Find Quality Products Online at:

2.8 Button Functions

Button
• When the rotary switch is set to W+A or A: Increases the brightness
of the display, making it easier to read the display in an environment with
▲
strong background illumination. Highlighting activated for 30 seconds.
When the rotary switch is set to SET-UP or MR: Serves as the ▲
•
arrow when browsing in the menus and values. The brightness of the
display does not change when device is set to SET-UP or MR.
When the rotary switch is set to W+A or A: Records the measured
•
MEM
value. All of the data is recorded in the Standard or Advanced mode.
▼ When the rotary switch is set to SET-UP or MR: Serves as the ▼
•
arrow when browsing in the menus and values.
• When the rotary switch is set to W+A (Advanced Mode):
Short Press: Switches the display through the following three modes:
- Display of the impedance recalculated at the selected frequency.
- Display of the contact voltage (product Z*I).
- Display of R and L.
Long Press: Enables or disables the audible alarms.
►
• When the rotary switch is set to SET-UP:
- Validation when browsing in the menus and values.
• When the rotary switch is set to MR (Advanced Mode):
- Switches the display through the measurement screens and the
measurement date/time.
When the rotary switch is set to W+A:
•
- Freezes the displayed measurement for as long as the HOLD button
is pressed. The NOISE, clamp open (
icons are visible, if they were active.
• When the rotary switch is set to MR or SET-UP:
- Enables or disables the Bluetooth
HOLD
• AUTO-HOLD Function:
&
If the AUTO-HOLD mode was enabled during instrument SET-UP (see
AUTO-HOLD
§ 4.4, menu #11), opening the clamp acts as the identical state to the
HOLD mode for as long as the clamp is open. The benefit of this function
is that it makes it easy to freeze the measurement with one hand, when
access to the HOLD button is difficult.
If the HOLD button is not pressed during this time, closing the clamp
automatically exits the AUTO-HOLD mode.
14
GlobalTestSupply
www.
Description
), and alarm exceedence ( )
connection.
®
Clamp-on Ground Resistance Tester Model 6417
.com
sales@GlobalTestSupply.com