Control Panel Description - Chauvet DJ 4BAR Flex T USB Quick Reference Manual

EN
Power Linking
For the maximum number of 4BAR Flex T USB products that you can power link at each voltage, see the User Manual or
the sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
appropriate clamps and with/without the included mounting brackets) or can be used floor/surface mounted.
Mounting Diagram
Mounting Bracket
x2

Control Panel Description

BUTTON FUNCTION
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
Enables the currently displayed menu or sets the currently selected value into the selected
<ENTER>
function
3
QUICK REFERENCE GUIDE
Safety Notes. This product can be mounted to most tripods, trussing (using
Tripod (sold separately)
Insertion Point w/
Adjustment Knob for
Tightening
Mounting Clamp
(such as CLP-15 from Chauvet)
Bracket
Adjustment Knob
IR Sensor for use with
IRC-6
(DO NOT block)
4BAR Flex T USB QRG Rev. 2