Lanner FW-8877 User Manual page 31

Chapter 4
SuperIO Configuration
In this screen, you will be able to modify the IRQ address
of the serial and parallel ports which are provided by the
Winbond SuperIO chip.
Serial Port 0/1 Configuration
This option specifies the base I/O port address and
Interrupt Request address of serial port 0 and 1.
item
Enabled/ Set this value to prevent the serial port from
Disabled accessing any system resources. When this
option is set to Disabled, the serial port physically
becomes unavailable.
Change Selects the serial port base address and IRQ for
Settings the interrupt address.
Network Application Platforms
Selection
BIOS Settings
25